The short version
- SEER2 = cooling efficiency over a season. HSPF2 = heating efficiency over a season. Higher is better for both.
- Among the 13,336 certified mini splits, the median is SEER2 21.0 and HSPF2 10.0.
- If you heat more than you cool, HSPF2 and the 5 °F rating matter more than SEER2.
SEER2: cooling efficiency
SEER2 stands for Seasonal Energy Efficiency Ratio (the “2” marks the updated 2023 test procedure, which uses more realistic airflow resistance). It’s the cooling output in BTU divided by the electricity used in watt-hours, averaged over a typical cooling season.
A system with SEER2 21 uses about half the electricity for cooling of an old air conditioner rated SEER 10 (about 9.5 SEER2).
EER2: cooling on the hottest day
EER2 measures efficiency at one fixed, hot condition (95 °F outside). It matters most in very hot climates, where the unit spends many hours at full load. SEER2 is the better guide for most homes.
HSPF2: heating efficiency
HSPF2 (Heating Seasonal Performance Factor) is the heating output in BTU per watt-hour over a typical heating season. Divide it by 3.412 for a rough average COP: HSPF2 10 is about COP 2.9, meaning nearly three units of heat per unit of electricity.
Electric baseboard heat has a COP of 1. A mini split with HSPF2 10.0 uses roughly a third of the electricity for the same heat, averaged over a season.
What is a good rating?
Based on the certified list (2026-11-17):
| Rating | Median | Top quarter starts at |
|---|---|---|
| SEER2 | 21.0 | 23.0 |
| HSPF2 | 10.0 | 10.6 |
| Heat left at 5 °F | 83% | 96% |
Smaller units usually score higher: 9,000 BTU systems have a median SEER2 of about 22.7, while systems of 30,000 BTU and up sit around 20.0. That’s why our Decoded Score only compares systems of the same size.
How much does a higher rating save?
Going from SEER2 20 to 25 cuts cooling electricity by 20%. Whether that’s worth paying more for depends on how much you run the unit and what you pay for electricity. Try it with your own numbers in the running cost calculator.
Where to find the ratings
Every certified system’s SEER2, EER2 and HSPF2 is in our model database, searchable by brand or model number, so you can check the exact indoor and outdoor combination you’re looking at.
