Mini split sizing: how many BTU do you need?

How-to. Updated , from the ENERGY STAR list of 2026-11-17.

Wall-mounted mini split indoor unit with its louver open

The short version

  • For cooling, the ENERGY STAR room air conditioner chart is a good start: about 12,000 BTU/h for 450 to 550 sq ft.
  • In cold climates, heating decides the size. Check how much heat the unit still delivers at 5 °F.
  • Use the sizing calculator for an estimate with your own room.

Cooling: the ENERGY STAR sizing chart

ENERGY STAR published this chart for room air conditioners. It is widely used as a first estimate for single-zone mini splits too.

Room size (sq ft) Cooling capacity (BTU/h)
150 to 250 6,000
250 to 350 7,000 to 8,000
350 to 400 9,000
400 to 450 10,000
450 to 550 12,000
550 to 700 14,000
700 to 1,000 18,000
1,000 to 1,200 21,000
1,200 to 1,400 23,000
1,400 to 1,500 24,000
1,500 to 2,000 30,000

Adjustments: −10% for a heavily shaded room, +10% for a very sunny one, +600 BTU/h per person beyond two, and +4,000 BTU/h for a kitchen.

Heating: why the climate changes everything

A room in Atlanta and the same room in Minneapolis need very different amounts of heat. A common rule of thumb (not an official standard) is about 20 BTU/h per sq ft in the warmest U.S. climate zone, rising to 50 in the coldest, for an average home with 8 ft ceilings.

The catch: a heat pump delivers less heat exactly when you need the most. In the certified data, the typical mini split keeps 83% of its rated heat at 5 °F (more in our cold-climate analysis). So in zones 5 to 7, compare your heating need with each unit’s 5 °F output, which is listed for every system in the model database.

Don’t oversize

Bigger is not safer. An oversized mini split reaches the set temperature quickly, then cycles on and off. That wastes energy, wears the compressor and removes less humidity in summer, so the room feels clammy. Inverter-driven mini splits handle this better than old air conditioners, but sizing close to your real load is still best.

When to get a Manual J

For a whole house, several zones or an unusual room (lots of glass, a converted garage, a loft), ask an installer for a Manual J load calculation. It accounts for walls, windows, orientation and air leakage room by room.